Cousins LP 1100X Stretch Wrap Machine
5000lb capacity, the LP 1100X is both forklift and pallet jack accessible. The 1100 series machines have an electro-mechanical braking system to apply force to load to the stretch film. They do not have a pre-stretch carriage.
LP 1100X SERIES Features and Specifications
Production Speed:
- 1-30 loads per hour (Single Turntable)
- NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity:
- Maximum load weight: 5,000# dynamic – 10,000# static
- Maximum load size: 50” W x 50” L (71” Max.
- load diagonal) x 87” H (plus up to 4” top overlap)
Turntable:
- 57” diameter laser-cut steel plate with surround deck
- protection - 3/8” thick
- Maintenance free - 36 roller bearing support system
- Turntable height 2.938” from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP DC variable speed motor
- Final revolution deceleration and positive stop alignment
- Rugged surround deck for added protection, 3 sided
- loading and pit mounting
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for
- additional film savings!
- Optional loading ramp 60” long x 48” wide complete with
- 10” level porch area available
Film Carriage Elevator:
- 1/2 HP DC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener
- Maintenance free 12 point carriage guidance system
Film Delivery System:
- Electro-Magnetic Web Tensioning System
- Standard 20” roll width, 10” diameter
- Carriage Descent Safety Shut-Off Device
- Side mounted film carriage for operator convenience and
- safety
Film Capacity:
- Accepts all commercial films wound on 3” diameter cores
- x 20” width
- Accommodates damaged cores
Control Features:
- Simple to operate
- PANASONIC PLC
- Power Off – On – Reset switch & Power On indicator
- light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Base or Top Wraps First program
- Reinforce Wrap control for mid-wrapping
- Up Only or Up/Down wrap program
- Emergency Stop button
- Turntable Jog switch
- Film Carriage Lower/Raise switch
- Film tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Variable turntable speed control
- Triple beam type auto load height sensing photo-eye,
- detects dark or shiny loads
- Separate 1 to 9 revolution top & bottom wrap control
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
Structural Features:
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes
- included for front and rear access
- Structural steel H-beam machine tower
- Electro-static powder coated paint finish
Electrical Requirement:
- 115 Volts 1 Phase 60 Hz 15 Amps