Cousins HP-SW Dual Turntable Stretch Wrap Machine
Increases production. Alternating turntables allows you to place and wrapa pallet load without having to first remove the one just previously wrapped. This is the case with the single turntable. Forklift accessible only.
HP-SW DUAL TURNTABLE SERIES Features and Specifications
Production Speed:
- 1-40 loads per hour (Dual Turntable)
- NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity:
- Maximum load weight: 5,000# dynamic – 10,000# static
- Maximum load size: 56” W x 56” L (79” max. load diagonal) x 80” H (plus up to 4” top overlap)
Turntables:
- 48” octagonal 5/16” thick formed steel plate turntable
- (qty. 2 for dual turntable)
- 4 point caster support system
- Turntable height less than 11” from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP DC variable speed motor (qty. 2 for dual turntable)
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator:
- 1/2 HP DC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener &
- Anti-Fall Safety Device
- Maintenance free 12 point carriage guidance system
Film Delivery System:
- Super Rapid Thread™ 20” capacity pre-stretch carriage
- with Patent Pending pressure balanced nip roller system
- 1/2 HP DC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33 to 313% fixed stretch capability
- Pre-stretch ratio variable by easy sprocket change
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Carriage Descent Obstruction Safety Shut-Off Device
- Side mounted film carriage for operator convenience and safety
Control Features:
- Simple to operate
- PANASONIC PLC
- Power Off – On – Reset switch & Power On indicator light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Base or Top Wraps First program
- Reinforce Wrap control for mid-wrapping
- Up Only or Up/Down wrap program
- Emergency Stop button
- Turntable Jog button
- Turntable Left/Right switch (for dual turntable systems only)
- Film Carriage Lower/Raise switch
- Film tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Variable turntable speed control
- Triple beam type auto load height sensing photo-eye,
- detects dark or shiny loads (2 photo-eyes provided with
- dual turntable system)
- Separate 1 to 9 revolution top & bottom wrap control
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
Structural Features:
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes
- included for front and rear access
- Fully guarded structural steel H-beam machine tower
- Electro-static powder coated paint finish
Electrical Requirement:
- 115 Volts 1 Phase 60 Hz 15 Amps