Cousins HP-SW Stretch Wrap Machine
4500lb capacity, the HP 2100X is forklift accessible only.
HP-SW SERIES Features and Specifications
Production Speed:
- 1-30 loads per hour
- NOTE: Process rates will vary with load size, number of
- wraps & forklift load/unload time
Load Capacity:
- Maximum load weight: 5,000# dynamic – 10,000# static
- Maximum load size: 56” W x 56” L (79” max. load diagonal) x 80” H (plus up to 4” top overlap)
Turntable:
- 48” octagonal 5/16” thick formed steel turntable
- 4 point caster support system
- Turntable height less than 11” from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP DC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator:
- 1/2 HP DC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener &
- Anti-Fall Safety Device
- Maintenance free 12 point carriage guidance system
Film Delivery System:
- Rapid Thread™ 20” capacity pre-stretch film carriage
- 1/2 HP DC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33 to 313% fixed stretch capability
- Pre-stretch ratio variable by easy sprocket change
- Rapid Thread™ Safety Door with auto power cut-off
- switch
- Carriage Descent Obstruction Safety Shut-Off Device
- Side mounted film carriage for operator convenience and
- safety
Control Features:
- Simple to operate
- PANASONIC PLC
- Power Off – On – Reset switch & Power On indicator light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Base or Top Wraps First program
- Reinforce Wrap control for mid-wrapping
- Up Only or Up/Down wrap program
- Emergency Stop button
- Turntable Jog button
- Film Carriage Lower/Raise switch
- Film tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Variable turntable speed control
- Triple beam type auto load height sensing photo-eye,
- detects dark or shiny loads
- Separate 1 to 9 revolution top & bottom wrap control
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
Structural Features:
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes
- included for front and rear access
- Fully guarded structural steel H-beam machine tower
- Electro-static powder coated paint finish
Electrical Requirement:
- 115 Volts 1 Phase 60 Hz 15 Amps